For
Ships For
FN Gloire
This is a 2.5 unit cruiser that runs at 22 seconds. Ben built it back in 2007 and won several Best of Class and Most Feared Awards. It has great guns, one of the things that got Ben those Most Feared Awards. He is selling it in a near ready to run state. Included is a radio and batteries. Plus all of the parts in the ship: pump, motors, props, rudder, bottle, regulator, radio box, solenoids and guns. The tiny radio box has a Team Delta switch for the guns and servos with micro switches for the pump and drive system. The sheeting still has holes in it from its last battle (8-8-39). The only time we were really able to shoot this ship, Ben wanted to test the pump. It needs to be resheeted and the regulator should be oiled. It’s a great little ship; Ben is asking $750 plus shipping for it. If you’re going to be at NATS this summer we might have room to bring it down.
Contact Ben at benny2.0@comcast.net
Parts For
Ryan has made molds
for several common parts on ships. All these parts are made of high strength
plastic.
They are easy to
sand down to fit in place and can take a bb hit.
Cost does not
include shipping. Shipping will be $3.00 and up depending on how much you get
and where you are.
Ryan can be reached at moo10032@yahoo.com or at 651-354-0280
If you have an idea
for another mold let Ryan know.
Every
addition to your
best of scale ship. $2.00
Keep your dual stern
guns aimed straight for highly accurate shooting. These two pieces
can be bolted
together and bolted to your deck or glued to the deck and threaded together.
They can be mounted in
your barbet or at the end of your barrels. $3.00 each set.
This triple stern
gun mount has a 2 degree angle in on each of the outer barrels.
This make the dime
size pattern at 18” every stern gun ship needs. These two pieces
can be bolted
together and bolted to your deck or glued to the deck and threaded together.
They can be mounted
in your barbet or at the end of your barrels. $4.00 each set
Keep your good props
in your tool box and put these on your dead shafts instead.
Can be drilled and tapped.
$3.00 each set of two.
This single gun
mount will hold your sidemount in place when you are
hugging and
slugging. Sand down to fit inside your turret, glue or bolt it in place.
$2.00 each.
Videos For
How to Build a Warship $10
Bob Hoernemann made this video as he built his French Light Cruiser Montcalm. Every step is detailed for you to follow along as Bob explains what he is doing, why it is done and how to do it. A must have for anyone just starting in the warship hobby. This will save time and money on your first warship build, like having a veteran battler at your finger tips for advice every day. This video is saved as a movie file that can be played on your computer. Also included are several files that will give you information on building and battling skills. 5+ hrs plus many files.
Welcome to the MWC $5
This DVD gives an over view of the Model Warship hobby using some of the best battling highlights from NATS 2002 to 2006. The video has narration to help you follow the action so you know what is happing. If you’ve never seen a battle this is a great way to get hooked by our wonderful hobby. 1.5hrs
Brouhaha 2010 $10
*NEW*
Throw Down in Motown $7
Ice Breaker 2009 $7
NATS 2009 $18
Tangler @ Engler 2009 $5
BrouHaHa March 2009 $5
Port Polar Bear 10-25-08 & Fall Fray 2006 $5
Port Polar Bear 9-27&28-08 $5
Fall Fray 2008 $5
NATS 2008 $15
NATS 2007 $5
Spring Fray 2007 $5
NATS 2006 & Fracus 2006 $10
NATS 2005 & Fray 2005 $10
NATS 2004 Highlights $10
NATS 2004 $10
NATS 2003 & 2002 Highlights $10
NATS 2002 & 2003 $10
To purchase any of these videos send a check with the videos you would like to:
Bob Hoernemann
Send Bob an e-mail so he can have the DVDs printed when your check arrives. r_hoernemann@hotmail.com